Search results

  1. ICTWoody

    SOLD - NuPrime DAC-10 - SOLD

    SOLD SOLD SOLD Hey guys, this is a little bit of a catch-and-release for me. NuPrime Audio DAC-10 in silver. I just got this as an off-dealer demo (long term demo, former dealer) back in February and it works and sounds AWESOME! I won't go into details, but you can read about it here...
  2. ICTWoody

    SOLD SOLD - “GPA’d” Altec 604-8G’s - SOLD SOLD

    Okay. I just have too much stuff. I keep thinking I’ll get to everything, but the reality is these are probably going to stay in the closet for a long time, especially since I have two pairs! This pair was going to be my “active 604’s” and have a different box design than my pair which I am...
  3. ICTWoody

    SOLD - McIntosh C32 Preamplifier - SOLD

    SOLD SOLD SOLD Decided I want to sell my freshly AudioClassic-ed McIntosh C32 preamp. I’m going a different direction in one of my systems and I don’t really have a future plan for this pre, so it’s just been sitting. It sounds really wonderful since getting it back and it deserves to be in...
  4. ICTWoody

    SOLD - Sennheiser BT450HD Bluetooth Wireless Headphones - SOLD

    Sennheiser HD450BT Wireless Headphones - NEW $149, Asking $100 shipped Picked these up to use at my office. Work well with my computer. Got laid off, don't need them now. Factory box and packing and cords etc... Look new. PP F&F Preferred. - Woody
  5. ICTWoody

    Grover Huffman ZX+ Speaker Cables 9ft

    Grover Huffman ZX+ Speaker Cables 9ft. Spades to Spades - $200 + Ship Got these to try out. Great reviews. Never hooked them up. Too long for my small room, too short for my big room. Asking what I paid. Here's pics... - Woody
  6. ICTWoody

    PSA/Heads up: TVC for a good deal on USAM...

    I know there are a few of us that believe in the greatness of TVC volume control. Here is a chance to dip your toes in the water for not a ton of dough... I have no need or I would have popped for it...
  7. ICTWoody

    SOLD - Parasound ZDac V2 and ZAmp V3 - SOLD

    SOLD on Audiocircle for $475 Breaking these out for more attention. Parasound ZAmp V3 and ZDac V2 (Sold as a set) - $500 ZAmp only - $225 ZDac only - $325 Bought brand new from Audio Advisor and have been used on and only on my desk with my computer since new. Factory boxes and packing and...
  8. ICTWoody

    SOLD - Audiolab 6000A Integrated Amp - SOLD

    SOLD SOLD SOLD Locally for $700. ----- Audiolab 6000A Integrated Amp - $700 BREAKING THIS OUT FOR MORE ATTENTION. Bought brand new as a temp amp while my other integrated was being repaired. Loved it so much I've kept it around and have been using it in a 2nd system. It's an amazingly musical...
  9. ICTWoody

    Capacitor Idenitification?

    I asked this in my Fairchild 412 thread... but I think it's too in-the-weeds. Can you guys help me identify this small cap value? I've tried google but it's really confusing to me. I believe this is a "spark arrestor"... so does it need to be a specific value or type? Thanks! - Woody
  10. ICTWoody

    WTB: Tonearm, maybe...

    I’m going to need a tonearm for my 2nd Fairchild project. I haven’t decided how much to invest. I’m leaning toward going reasonable with a Fidelity Research FR-54 from Japan, or going up a bit for possibly one of Alfred Bokrand 9 or 10” option... or perhaps all the way up to a Audiomods Type...
  11. ICTWoody

    My Philharmonic 3’s - Refining the refined...

    So I was going to sell my Dennis Murphy Philharmonic 3 loudspeakers. I had a buyer... I got cold feet. A little history about how I ended up with Phil 3’s. I started out with some passive KEF LS50’s a number of years back when they were really the “flavor of the year”. I really enjoyed the...
  12. ICTWoody

    Got some interesting new horns...

    Saw these on that big dumb auction site and just had to get them. I think these might be some of the earliest versions of the Bowtie horn. Comparing them to my Emilar they are very close, but these are finished better. They seem to have been machined after casting. The welds are bit nicer...
  13. ICTWoody

    SOLD - Well Tempered Simplex Turntable and LPS - SOLD

    Well Tempered Simplex Turntable with DPS Power Supply and dust cover Need to thin the TT herd! I love this odd little deck with it's golf ball and goo. Arguably my best sounding turntable. Retails for $1999 and the DPS Linear Power Supply is an additional $450. Factory boxes and packing...
  14. ICTWoody

    Help me learn more about REW and reading data...

    Hey guys, Tonight I started playing around with REW and my miniDSP UMIK-1. I got a new laptop so I figured I’d give this a whirl. Previously I was just using the mic for an RTA with my iPad. Here’s a couple of measurements overlaid. They are basically the same, but with the phase switch on my...
  15. ICTWoody

    Found: Cartridge - PURCHASED. Thanks!

    I’m needing a cart for my SL-1200 project I posted about. It has a Sumiko Premier FT-3 arm with fluid damping. I’m interested in MM, MC (HO or maybe LO). Before I go new I know you guys have stuff kicking around. My only requirements are under 8gr weight or I have to get an auxiliary weight for...
  16. ICTWoody

    Woody’s Technics SL-1200MK2 Project

    Hey guys. Because I don’t have enough irons in the fire, I decided to slip another little project in... been thinking about a cool modded SL-1200 for a while. Thanks to @S0und Dragon selling me a donor deck (he can tell you the story of how Brittany Spears destroyed the arm) for cheap... I was...
  17. ICTWoody

    Non-Adjustable Headshells? Pros and cons?

    Hey there folks... I was wondering what everyone though of non-adjustable headshells? I've been looking at a lot of used ones on ebay lately, and I've noticed that many higher end vintage headshells... from Ortofon, SME and others, don't have adjustable "slots" in them. SMEs with a fixed set of...
  18. ICTWoody

    Fahrenheit 412... err, Fairchild.

    Guys. I’m sick. I can’t help myself. Dang, @jhoyt is an enabler and pointed this out to me this morning. I made an offer and now it’s mine. Dang it. But I’ve kinda been thinking it would be cool to go with my 275 system. I guess I need to read up if these are actually any good. Dang it. - Woody
  19. ICTWoody

    URGENT: Speaker design help needed! Altec content!

    Hey gurus. You might remember those DIY Altecs I picked up a few months back.They had Altec. 414-16c’s and some Goodman’s parts in them. Well I’m about to have some new front and rear baffles CNC cut. I had sent the cut path to my vendor and dropped off the plywood... but I just realized I...
  20. ICTWoody

    SOLD - KEF LS50W Speakers with KEF Stands - SOLD

    I find myself in the land of too much stuff again, so my KEF LS50W's are up for grabs. This pair of white LS50W's are in excellent condition. 9/10. They include all the factory boxes, manuals packing etc... I will also include a longer white flat ethernet cable for connecting the speakers, and...
Top