Looking for some really special output transformers for your SE45 project? Jack Elliano of Electra-Print Audio winds some of the best single-ended "iron" out there, and these are his top-of-the-line transformers with pure silver secondaries -- not partial silver or silver-plated copper wire... Pure silver. The tasty stuff. I've been using these for years in my SE46 amps and there's no going back!
These are spec'd for 45 tube and similar, with a 5,000 ohm primary and 8 ohm secondary, and gapped for ~50ma. They were used in my amps until I swapped 'em for a different pair of the same transformers.
Asking price is $750/pr. A nice deal, considering the current cost of silver and what you'd pay for new!
Nate
These are spec'd for 45 tube and similar, with a 5,000 ohm primary and 8 ohm secondary, and gapped for ~50ma. They were used in my amps until I swapped 'em for a different pair of the same transformers.
Asking price is $750/pr. A nice deal, considering the current cost of silver and what you'd pay for new!
Nate