Im repurposing this thread originally asking about the output transformers for my proposed 2a3 push pull amplifiers to cover the whole amplifier.
revised schematic:
R1 : 100K
R2 : 1K
R3 : 10R
R4 :
R5 : to drop the voltage a bit for the CCS
C1 : to be calculated as this will detirmine the B+
C2 : 50uf
C3 : 50uf
C4 : 100uf electrolytic
V1 : D3A
V2 : 2A3 x2
V3 : 5U4GB
V4 : 0D3 VR
T1 : Hammond 374BX
T2 : Hammond 266PA12
T3 : San-Sui 1000A 6.6K
T4 : Dave Slagle Interstage/splitter 49% Nickel 45Hy 15ma
L1 : Parmeko 5H
L2 : Parmeko 5H
revised schematic:
R1 : 100K
R2 : 1K
R3 : 10R
R4 :
R5 : to drop the voltage a bit for the CCS
C1 : to be calculated as this will detirmine the B+
C2 : 50uf
C3 : 50uf
C4 : 100uf electrolytic
V1 : D3A
V2 : 2A3 x2
V3 : 5U4GB
T1 : Hammond 374BX
T2 : Hammond 266PA12
T3 : San-Sui 1000A 6.6K
T4 : Dave Slagle Interstage/splitter 49% Nickel 45Hy 15ma
L1 : Parmeko 5H
L2 : Parmeko 5H
Last edited: